Parameters:
Charging adapter input voltage: 100-240V AC 50~60Hz
Charging adapter rated power: 10.0W
Maximum output voltage: 8.4V
Lithium polymer battery : 7.4V 760mAH
Net weight: 175g
Volume: 149*47.6*33.7mm
Black interface: dedicated DC5.5 female interface
Feature instructions:
1. Power switch: Install the battery or plug in the adapter. Press the power switch button to release the power, press again to release the power off, the default fifth gear, green light indication.
2. Green cycle button: This button is used to change the gear once every time. The first gear is the slowest blue light indicator, the fifth gear is the green light indicator, and the ninth gear is the fastest red light indicator. Gear cycle adjustment, starting from 5 6 7 8 9 1 2 3 4 5 6 7 8 9 1 2 3 4 5 6 7 8 9-speed cycle… Adjust the gear that suits you according to the speed you want to use.
3. The tattoo machine has a configuration base. The machine base is equipped with a magnetic control switch. When the machine is turned on, the machine is placed on the machine base and the motor stops working. The RGB indicator lights alternately, picking up the machine leaving the machine base to work automatically.
4. Battery charging: The charging cable and the battery are connected. The USB plug is inserted into the charging adapter. The charging indicator turns red. When the battery is fully charged, the charging indicator turns green.
5. When the battery voltage is lower than 6V, the red LED flashes, the other LEDs do not work, the motor has no output, and the motor overload will have the same output mode.
Reviews
There are no reviews yet.